Who Does the Work
Cypress Garage Door Pros is a garage door repair company working out of 19005 FM 529 in Cypress. There's no long company history to recite here and no anniversary to celebrate - this page is about getting your door fixed, not our backstory. What matters more is what we're set up to handle: torsion and extension spring replacement, opener repair and installation, track and roller work, cable replacement, and panel repair or swap-out on residential doors.
Most of the houses in this service area were built between 1971 and 2002, with the bulk of that stock going up in the 1980s and 90s across the fourteen or so named communities we cover. That means a lot of the doors and openers we see are original equipment from that build era, not recent upgrades - chain-drive openers wired straight to old outlets, torsion springs sized for doors that have since been replaced with something heavier. Knowing the age of the housing stock out here shapes how we quote a job, because parts availability and labor time both depend on what era the door and hardware came from.
We quote on the door in front of us, not a guess. That's the whole approach.
The Work We Take On
We work on residential garage doors and the hardware that runs them: torsion springs, extension springs, cables, rollers, tracks, hinges, and panels. On the opener side, that covers chain-drive, belt-drive, and screw-drive units - troubleshooting a dead opener, replacing a burned-out motor, swapping in a new unit when the old one isn't worth saving.
We cover Cypress and the surrounding area out toward Jersey Village (about 9 miles), Stagecoach (12 miles), Pinehurst (15 miles), Waller, Cinco Ranch, and Magnolia (16-17 miles), and the Village communities and Mission Bend, Aldine, Pattison, and Brookshire further out. If your address falls somewhere in that radius, we can generally get to it.
Given this area sits in a moderate-heat climate band rather than a hard-freeze one, we don't see much of the sudden spring-snap-in-a-cold-front failures that colder regions get. What we do see more of is heat-driven wear - dried-out lubrication, warped wood panels, and openers straining in a hot attic space above the garage. That's a slower kind of failure, and it usually shows up as a door that's gotten noisy or sluggish over months, not one that breaks overnight.
What Happens After You Call
An accurate quote depends on a few specific things: the size of the door (single or double), whether it's steel, wood, or composite, roughly how old the opener and springs are, and what the door is currently doing - won't open, opens partway, makes noise, one side sags, and so on. Photos of the door and the spring/track area help a lot if you can send them ahead of the visit.
What we can't price without seeing the door in person is anything involving spring counterbalance, because spring size and wind count vary by door weight and can't be reliably guessed off a phone description. Same goes for track alignment issues and any damage where a panel has been hit - until we're standing in front of it, that's a range, not a number.
Once we've got the basics, we can usually give you a phone estimate for straightforward jobs like opener replacement or a standard spring swap. For anything with damage or an unusual setup, we schedule a look before quoting a final price. Either way, you'll know what you're paying for and why before any work starts - no surprise add-ons once the truck's in the driveway.
Call (281) 994-9442 to start, or send details through the site and we'll follow up.
Work We Turn Down
We don't do structural carpentry - if the wood framing around the door opening has rotted out or the header needs rebuilding, that's a job for a general contractor before a door company can do anything useful. We also don't install or service gate operators; that's a different system entirely from a garage door opener, even though people sometimes lump the two together.
We also won't quote a firm price sight-unseen on a door with visible structural damage - bent track from a car backing into it, a panel that's been caved in, anything where the actual extent of the damage isn't clear from a description. We'll come look, but we're not going to give you a number over the phone that we might have to walk back once we see the real state of things. That's not us being difficult, it's just that a wrong quote is worse than no quote.
Frequently asked questions
Can you give me a price over the phone?
For simple jobs like opener replacement or a standard spring swap, often yes, once we know the door size and what's wrong. For anything involving visible damage, an odd track setup, or a door we haven't seen, we need to look at it first - spring and track pricing depends on details a phone call can't confirm.
Do you service my area if I'm not in Cypress itself?
We cover Cypress and out toward Jersey Village, Stagecoach, Pinehurst, Waller, Cinco Ranch, Magnolia, and several of the Village communities and towns further out, roughly 9 to 20 miles from Cypress. Call (281) 994-9442 with your address and we'll confirm.
What information should I have ready when I call?
Door size (single or double), material if you know it, roughly how old the door and opener are, and what it's actually doing wrong - won't open, sagging on one side, loud grinding, that kind of thing. Photos of the door and the spring area help us give a tighter estimate before we arrive.
Do you work on gates or just garage doors?
Just garage doors and their openers, springs, tracks, and panels. We don't install or repair gate operators - that's a separate system with different hardware, and it's not something we take on.